Frame-mounted insect screens provide safety and comfort.

With the insect screen, you can leave your window open without fear or risk that unwanted insects fly into your house.

Swivel brackets are used to mount the screen.

The frame-mounted insect screen is easy to mount and remove for the winter – with no tools required.

Aluminium profiles and nets used for screen production are of the highest quality, so the products are durable and resistant to weather conditions.

Our offer also includes hinged insect screens for balcony or terrace door frames. A wide aluminium profile used in them makes the screen big and robust, while the screen net is made of durable glass fibre. Hinged insect screens are comfortable to use and are mounted to the door frame with hinges on one side and with magnetic locks on the other side, which protect the screen from self-opening. In addition, the screen is reinforced with a transverse profile, making the entire screen robust.

Aluminium profiles and nets used for screen production are of the highest quality, so the products are durable and resistant to weather conditions.

Aereco 2MO

The Aereco 2MO window vent includes:

• External canopy – which protects against rain and insects
• Internal part – responsible for the amount of air supplied

Self-regulating window vent. The amount of air supplied depends on the difference in pressure between the outside and inside of the room. This regulation is provided until the maximum pressure difference level is achieved. At this level, the window vent reaches its maximum efficiency. If the pressure difference level still rises, the window vent blades deflect, thus reducing the amount of air supplied. This may occur e.g. by a gust of wind. The user may also close the blades to reduce the airflow to a minimum.

Acoustic attenuation D_n,e,w of the kit when the window vent is open is 33dB(A)

Aereco AMO

The Aereco AMO window vent includes:

• External canopy – which protects against rain and insects
• Internal part – responsible for the amount of air supplied

Self-regulating window vent.

The amount of air supplied depends on the difference in pressure between the outside and inside of the room. This regulation is provided until the maximum pressure difference level is achieved. At this level, the window vent reaches its maximum efficiency. If the pressure difference level still rises, the window vent blades deflect, thus reducing the amount of air supplied. This may occur e.g. by a gust of wind. The user may also close the blades to reduce the airflow to a minimum.

AERECO : EMM HIGRO^®

HUMIDITY-CONTROLLED DOUBLE AIRFLOW WINDOW VENT

A simple yet effective solution

The most popular humidity-controlled window vent. Available in 4 different colours. The aesthetic design and operation reliability make the EMM window vent the most popular AERECO product. Combined with an acoustic canopy, it provides the acoustic attenuation of 38 dB

Humidity-controlled: the flow depends on the relative humidity inside rooms.

Acoustic attenuation: Dn,e,w = 38 dB when the acoustic canopy is used.

Directional airflow: vertical or diagonal airflow depending on the position.

Easy maintenance: the user does not control the airflow. Clean the window vent casing periodically.

Setting the lock to open position A – the damper changes its position depending on the relative humidity in the room. The airflow ranges from 6 to 30 m³/h. Setting the lock to closed position A – the damper is set to minimum airflow, the amount of air supplied by the window vent is up to 6 m³/h. This option should only be used in adverse weather conditions.

AERECO EXR HIGRO^®

HIGRODYNAMIC™ HUMIDITY-CONTROLLED WINDOW VENT

Modern design, monocouque-type casing, and maximum functionality

The new aesthetic EXR window vent is designed to be mounted to PVC and aluminium windows and to external roller shutters. An acoustic foam insert provides the acoustic attenuation of up to 42 dB(A) (depending on accessories). The first Aereco window vent with a manual window vent full opening and closing function, which supports the EXR humidity control function. Available in many airflow and acoustic attenuation versions and in 4 standard colours.

Humidity-controlled: the flow depends on the relative humidity inside rooms.

Acoustic attenuation: up to Dn,e,w = 42 dB with accessories.

Diagonal airflow for higher comfort of household members.

Aesthetic monocoque-type casing for installation on most window profiles.

Easy maintenance: the user does not control the airflow. Clean the window vent casing periodically.

Setting the lock to open position A – the damper changes its position depending on the relative humidity in the room. The airflow ranges from 6 to 30 m³/h. Setting the lock to closed position A – the damper is set to minimum airflow, the amount of air supplied by the window vent is up to 6 m³/h. This option should only be used in adverse weather conditions.

RENSON WINDOW VENTS with many forms and solutions

Each and every available type may be individually tailored to building type, room size, and requirements of building regulations.

TOP-MOUNTED WINDOW VENTS

• Invisivent EVO
• Invisivent EVO HF
• Invisivent EVO AKR33
• Invisivent EVO AK

GLASS-MOUNTED WINDOW VENTS

• TC45
• TC60
• AR60
• THK60
• AR75
• AR90
• THK90
• THM90EVO

Schüco Vento

Schüco Vento is an addition to typical pressure ventilation without restricting the volume of air supplied, which ensures the airflow of approx. 0.4 m³/h at a pressure difference of 10 Pa.

The product provides air exchange when windows are closed through small single window vents mounted between the window frame and the sash frame. It has ventilation flaps with different counterweight options that regulate air exchange depending on wind pressure. The inflow of air in the upper part of the window and the restricted volume of air ensure gentle air distribution in the room.

Schüco ventilation systems may be used for new buildings and renovated ones as well. Their undisputable advantage is simple system installation in and removal from an existing plastic window.

• the air exchange rate of approx. 0.15 m3/h reduces relative humidity of air by 10-15%
• acoustic attenuation of up to 42 dB if appropriate glazing is used
• the volume of air is restricted in the range of 30-50 Pa
• control flaps close automatically at higher pressure differences

CLASSIC ALUMINIUM SILLS

Soft Line and Classic aluminium sills are manufactured using aluminium drawn from structural alloys meeting the highest quality standards. The products have high rigidity, excellent durability, weathertightness, and robust design. Soft Line and Classic sills have a full range of accessories: end caps, seals, system stainless steel screws, screw-adjusted tight clips as well as drips and caps.

The Classic sill system features:

• Angular-shaped aluminium profiles
• Different sill widths ranging from 50 to 380 mm
• Extruded profiles having high rigidity
• Wide range of accessories including a sill support for thermo-type facades.

Classic sill connectors

Classic sill caps

SOFT LINE ALUMINIUM SILLS

Soft Line and Classic aluminium sills are manufactured using aluminium drawn from structural alloys meeting the highest quality standards. The products have high rigidity, excellent durability, weathertightness, and robust design. Soft Line and Classic sills have a full range of accessories: end caps, seals, system stainless steel screws, screw-adjusted tight clips as well as drips and caps.

The Soft Line sill system features:

• Classic rounded aluminium profiles
• Sill widths available from 50 to 380 mm
• Extruded profiles having high rigidity
• Wide range of accessories

Soft Line sill caps

Soft Line sill connectors

CC1000^® TOP-MOUNTED ROLLER SHUTTER

CC1000 – basic top-mounted roller shutter system The inspection cover is installed at the front of the box. These roller shutters are suitable for windows whose maximum window frame thickness does not exceed 95 mm. Roller shutters may be controlled manually using a cord or electrically using a switch or remote control. They are not available with an insect screen.

MX1200 TOP-MOUNTED ROLLER SHUTTER

MX1200 is a roller shutter system designed for renovation- and monoblock-type windows.  The specific design of the box with the inspection cover at the front makes it possible to install the roller shutter on window frames 60-180 mm wide. The solar-resistant PVC material makes discolouration less likely. The aesthetic values of the design may be easily improved by the rounded bottom edge of the inspection cover and using inspection cover caps and caps for box sides. Roller shutters may be controlled manually using a cord or electrically using a switch or remote control.

TL1000® TOP-MOUNTED ROLLER SHUTTER

TL1000 – it is a system that may be used for new buildings and renovated ones as well.  The inspection cover is installed at the bottom of the box – this allows the roller shutter box to be installed inside the apartment while still having access to the roller shutter. These roller shutters are suitable for windows whose maximum window frame thickness does not exceed 95 mm. Roller shutters may be controlled manually using a cord or electrically using a switch or remote control. TL1000 roller shutters are not available with an insect screen.

TP1000K^® TOP-MOUNTED ROLLER SHUTTER

TP1000K is a system for window frames even 202 mm wide (up to 264 mm with an extension). The extension increases the box depth by 31 or 62 mm. This system may have the inspection cover at the bottom (for inside box installation) or at the front (for installation on a wide window frame). Roller shutters may be controlled manually using a cord or electrically using a switch or remote control.

TP1000K® TOP-MOUNTED ROLLER SHUTTER with insect screen

TP1000K is a system for window frames even 188 mm wide (up to 250 mm with an extension). The extension increases the box depth by 31 or 62 mm. This system may have the inspection cover at the bottom (for inside box installation) or at the front (for installation on a wide window frame). Roller shutters may be controlled manually using a cord or electrically using a switch or remote control. The insect screen version provides effective protection against insects as well as pollen, leaves, and dust, without preventing air or daylight from entering your room.

Vegas Revo is a modern top-mounted roller shutter system manufactured from the highest-quality PVC material for all who appreciate modern window covering solutions.

The design results from many years of experience and advice from window covering specialists and practitioners – taking into account the needs and requirements of today’s market.

It is a system developed by specialists for specialists: architects, builders, window covering system manufacturers and distributors. It is extremely easy to manufacture and install.

Vegas Revo is a remarkably easy and intuitive solution.

RL2000^® EXTERNAL ROLLER SHUTTER

The RL2000 roller shutter in an oval box is the simplest solution in technical and economical terms. The box size depends on the entire roller shutter height and type of curtain. There are versions with and without an insect screen.

EXTERNAL ROLLER SHUTTERS IN ALUMINIUM BOXES – ADAPTIVE

• Designed mainly for existing buildings.
• They may be mounted directly to the window joinery (in a recess) or directly to the wall.
• They may be used with an insect screen.
• They provide a reduction in energy expenses – up to 30% per year.
• Manual or electric control.

The most popular external roller shutter system. They are considered products of high European standard due to their excellent components and careful design. Main component suppliers include reliable ones such as Aluprof and Somfy. Adaptive roller shutters are designed for use in existing buildings. Rich colours make them excellent decorations. These roller shutters have good acoustic and thermal insulation. In summer they significantly reduce room heating, while in winter they reduce heating costs.

You should know:

Adaptive roller shutters may be installed on the wall or in a recess. Recess installation generally reduces the inside surface area of a window. However, it is faster and less complicated. Guides are screwed to the window frame. Roller shutter installation requires an electrical connected if the roller shutter is to be controlled by a motor or a hole through the wall or window frame if it is to be controlled manually. When installing a roller shutter, remember to seal the connection between the box and the wall tightly and rivet the guides to the sides. The roller shutters may be manufactured with insect screen separation without curtain separation.

Available boxes:

• standard box

• quarter round box

IT2000^® EXTERNAL ROLLER SHUTTER

This system combines the advantages of external roller shutters with those of top-mounted roller shutters. The main advantage of this system is that you can install it without enlarging window holes and install the box at the same time, which provides a visual effect that is similar to that obtained when using top-mounted roller shutters. In this type of roller shutter, the entire box is located outside the building and it can be accessed through an inspection cover located at the bottom of the box.  There are versions with and without an insect screen.

OL2000^® EXTERNAL ROLLER SHUTTER

EXTRUDED BOX made of extruded aluminium.

Combination of elegance and harmony at an affordable price. It is the simplest solution in technical and economical terms while still keeping an interesting design. The box size depends on the entire roller shutter height and type of curtain. As standard, half-round guide covers are available in this system. There are versions with and without an insect screen.

OS2000^® EXTERNAL ROLLER SHUTTER

Half-round shape of the roller shutter for an elegant style of your window. The box size depends on the entire roller shutter height and type of curtain. There are versions with and without an insect screen.

OS2000® EXTERNAL ROLLER SHUTTER with insect screen.

Half-round shape of the roller shutter for an elegant style of your window. The box size depends on the entire roller shutter height and type of curtain. The insect screen version provides effective protection against insects as well as pollen, leaves, and dust, without preventing air or daylight from entering your room.

ST2000® EXTERNAL ROLLER SHUTTER

Roller shutter in a box cut at a 45-degree angle mainly mounted to existing windows or elevations. This type of system is the simplest solution in technical and economical terms. The box size depends on the entire roller shutter height and type of curtain. Installation method selection often depends on it. The lowered roller shutter is a closure of an opening in the building envelope and thus serves as a partition with insulating properties. Rigid polyurethane foam inside the profiles provides additional thermal insulation. A layer of air between the lowered roller shutter curtain and the window/door makes heat transfer between the room and the outside difficult. This saves the heat energy needed to heat rooms and protects against excessive room heating on hot days. There are versions with and without an insect screen.

Z-90 facade Venetian blinds have been designed using the latest technological solutions. They have been designed with the needs of architects, manufacturers, distributors, and, above all, end users in mind. Systems of these external window coverings have unlimited slat configuration options. As a result, controlling the sunlight level in rooms has never been so easy.

Additional accessories such as an electric drive or a sunlight sensor ensure functional and fully automatic management of the entire building facade. A combination of facade Venetian blinds with an air conditioning and lighting system allows you to create a smart and environmentally-friendly building. Excellent for large facilities. Smooth manual or electric control as well as possible integration with automatic weather stations.

C-80 facade Venetian blinds have been designed using the latest technological solutions. They have been designed with the needs of architects, manufacturers, distributors, and, above all, end users in mind. Systems of these external window coverings have unlimited slat configuration options. As a result, controlling the sunlight level in rooms has never been so easy.

Additional accessories such as an electric drive or a sunlight sensor ensure functional and fully automatic management of the entire building facade. A combination of facade Venetian blinds with an air conditioning and lighting system allows you to create a smart and environmentally-friendly building. Excellent for large facilities. Smooth manual or electric control as well as possible integration with automatic weather stations.

Corona S 150 is a system of plastic profiles based on the Corona CT 70 system. It is used to manufacture balcony, terrace, and conservatory doors. This system features the best thermal properties, large unit sizes and it is easy to operate. Narrow face widths ensure maximum light penetration. The system provides a wide range of door opening and design versions.

Features:

• Wall thicknesses according to RAL-GZ/ 716 and DIN EN 12608 Class A
• Two brush seals on the perimeter at the leaf rebate for improved weathertightness
• Perfectly-sized reinforcement chambers meet the highest structural requirements
• Easy to operate even with increased leaf weights.
• Profiles with a leaf thickness of 70 mm ensure very good thermal insulation
• PVC on the perimeter minimises heat loss
• Perfectly sized reinforcing profiles in the leaf frame ensure maximum stability and durability
• The system is suitable for manufacturing large-size structures.
• The system offers a wide range of single colours as well as colours imitating wood

The Schüco S 74 PVC-U sliding system is used as a terrace, porch door, or a partition unit. Narrow face widths ensure maximum light penetration.

The offer includes a wide range of foil colours.

• Ensures comfortable sliding of one or more leafs
• System of 3 chambers (frame) and 2 chamber (leaf)
• Specially designed brush seals ensure smooth sliding and ease of operation in all conditions and for all types of structures
• Various configurations and colour variants; a wide range of single colours as well as colours imitating wood; exclusive SchucoAutomotiveFinish technology

EXCELLENT THERMAL INSULATION PROPERTIES AND COMFORT

Plastic lift-and-slide doors based on Schüco systems are characterised by the highest thermal insulation values thanks to a thermoinsulated door threshold. Choose the right material for you – depending on building requirements. Your individual preferences are always the most important.

• Small visible face width
• Increased burglar resistance
• Numerous individual configuration options

Due to sophisticated plastic profiles, a basic installation depth of 70 mm, and high-quality double glazing, the Schüco EasySlide lift-and-slide door (Corona CT 70 HS) achieves excellent thermal insulation values. The threshold of the lift-and-slide door is constructed such that there is a thermal break between the outside and inside. “Draughty” floor areas in front of the door system are therefore effectively prevented. An innovative gasket system ensures maximum resistance to wind and driving rain, as well as the best possible noise reduction.

• Highest burglar resistance
• Very easy to operate and very silent
• Flat thermoinsulated threshold for easy access
• A wide range of colours and foils imitating many species of wood as well as Schüco Corona TopAlu external aluminium cover caps

A lift-and-slide door for terraces with weldable EPDM glazing gaskets combines thermal protection in low-energy building standard with a sleek design.

The product is available in the full Schüco colour range including AutomotiveFinish colours and in a version with aluminium cover caps.

The new lift-and-slide system from Schüco combines maximum fabrication and installation efficiency with the highest standards of comfort and design.

The innovative Schüco LivIngSlide lift-and-slide system has been designed on the basis of the Schüco LivIng system dimensions, as the basic leaf installation depth is 82 mm.

A particular highlight of the Schüco LivIngSlide system includes factory-rolled, weldable EPDM glazing gaskets in the leaf frame. They ensure soft inner corners even after the welding process and thereby optimum weathertightness in this area. Continuous sealing on several levels between the leaf and frame trim also reliably prevents draughts and the build-up of condensation. To prevent sloping roller carriages, a roller carriage support is used to ensure secure centring and fixing.

Another strength of the new lift-and-slide system is its attractive appearance. The flush design avoids the typical gaps in the fixed field and creates a modern, streamlined appearance which is also easy to clean. The narrow centre joint guarantees maximum light penetration. Schüco LivIngSlide offers a wide variety of design options thanks to its incorporation in the Schüco colour range.

Schüco TopAlu: Plastic windows with external aluminium cover caps

Externally-mounted aluminium cover caps are an attractive design option for plastic window and door systems.

The Schüco TopAlu aluminium cover cap system combines excellent thermal insulation, weathertightness, and low maintenance of plastic units with the particularly high-quality, diverse look and high level of resistance of aluminium surfaces. The timeless elegance of aluminium makes it the ideal material for modern architecture. The aluminium cover cap is fixed to the outside of the profile using simple clip-on technology and can be coated or anodised in almost all colours. Another benefit is that the material is particularly resistant to environmental influences.

Schüco TopAlu gives plastic windows a maximum service life and also offers first-class design options. There are (virtually) no limits to individual requirements.

The Schüco Alu Inside Nordic plastic system combines classic design with modern technical properties.

It is a system of outward-opening windows to be used mainly during the modernisation or renovation of existing buildings.

Three drainage levels and patented aluminium profile rolling technology based on an 11- and 7-chamber construction guarantee the best thermal insulation with narrow visible face widths.

• Window system certified by the Danish Technological Institute (Teknologisk Institut Aarhus)
• Excellent test results
• Wall thicknesses according to DIN EN 12608 Class B
• 7-chamber (leaf) and 11-chamber (window frame) system
• Frame construction without steel reinforcements or insulators
• Fully recyclable
• Perfectly-sized and profile-integrated aluminium reinforcements for high structural requirements; additional reinforcement or insulation chamber for special requirements
• Optimised glazing rebate geometry for optional use of additive adhesive technology (Additive Klebetechnik).
• Glazing bead height up to 23 mm for deeper glazing installation
• Optimum thermal insulation:
• Patented aluminium profile rolling technology
• High installation depth with deeply embedded and protected hardware
• Various configurations and colour variants; a wide range of single colours as well as colours imitating wood

Schüco Alu Inside – the new generation of steel-free profiles

Schüco Alu Inside 7-chamber window system with three drainage levels made with patented aluminium profile rolling technology, whereby continuous aluminium strips are simultaneously extruded into PVC-U profiles. With the industrial production of profiles, the system makes the cost-effective manufacturing of windows for passive and low-energy houses in the highest standard possible.
A wide range of accessories for the system also guarantees high safety.

Schuco CT70 Accent is a system with rebate gasket based on Corona CT70, with which it is fully compatible. Especially for the Dutch market – the block outer frames and their innovative shape reproduce the typical timber window look for a visual modernisation of wooden windows. The system boasts excellent thermal insulation properties and narrow face widths. Colour accents may be added to profiles thanks to white and cream colours of the basic structure and a wide selection of decorative foils.

Schüco Living –  The new generation of systems for pioneering plastic windows

The Schüco LivIng window system – based on the twin system technology – impresses with its simplicity, efficiency, and flexibility in production and installation. At the same time, it guarantees the highest standards of comfort and safety and offers a wide range of design and production options.

With the Schüco LivIng plastic system, Schüco sets standards for the energy efficiency of steel-reinforced profile systems. Thanks to the twin system technology, this innovative 7-chamber system may have both a rebate gasket and a centre gasket and achieves excellent thermal insulation properties with an installation depth of 82 mm. In conjunction with the centre gasket, passive house projects may be implemented without additional costly measures.

The first weldable EPDM gasket is integrated with the Schüco LivIng window system. By using a flexible and weldable material, better sealing properties in the corner area of the element are ensured, simultaneously giving an elegant look without gasket hardening in this area. A durable and environmentally-friendly material provides the required weathertightness throughout the use of the product.

As a complete system, Schüco LivIng offers many variants of connection and additional profiles: regardless of whether it is used for a private house, a facility, a new building, or a renovated one – the Twin system meets the individual requirements of investors.

As far as colours are concerned, Schüco AutomotiveFinish glossy metallic shades are available as well as a range of PVC Schüco UnlimitedFinish and Schüco TopAlu foils. The surface concept is matched by basic profile bodies offered in different colours.

White Schüco LivIng profiles are delivered with modern, silver-grey gaskets, while foiled profiles are equipped with black gaskets.

Schüco CORONA CT 70 – the most versatile window system

CT 70 AS is a 5-chamber plastic profile system with rebate gasket. The system boasts very good thermal insulation properties and narrow face widths. The sealing system with two rebate gaskets and deep glazing reduce energy consumption. Two drainage levels and the use of an appropriate glazing unit guarantee optimum protection against wind, rain and noise. Narrow visible window profile widths ensure maximum light penetration. The system has robust steel profiles in the frame and sash for stability. The offer includes a large selection of foils and the option to use coated or anodised cover caps.

The new Schüco FWS 50 mullion-transom facade combines the most simplified processing with energy efficiency reaching the standard for passive houses.
The Schüco FWS 50 facade sets new processing and energy efficiency standards.  Improved systems for a more convenient processing for both the workshop and the construction site.  The use of new prefabricated components significantly reduces the realisation time, making it more efficient.
Schüco FWS 60 façade offers architects multiple design options for the most popular visible profile widths – including a certified SI version for passive construction.
New system components make it possible, above all, to rationalise the work on the construction site: for example, an innovative system of integration into the building’s structure, ensuring reduction of contact points, makes installation easier and more reliable.
Thanks to the glass supports programme the installation of heavy panes is easy and safe while carrying greater loads!

• An innovative cable routing system for the mullion and transom façade, providing the contractor with a simplified electrical installation.
• Innovative SI insulator with a hard core: easy screw tightening, transport without damage and rational processing
• Uniform gasket system for the entire system platform based on 9 mm, 11 mm and 13 mm high gaskets inside and 5 mm outside
• New type of glazing rebate spacing profiles and adaptive profiles for lintel-window glazing with simple clipping intallation technique with optimal gaskets: safe and clean execution
• Main pressure profiles in the future all with the same contour, including the required insulation materials (Standard, HI and SI): prefabricated solution for manufacturing economy with minimal preparatory work, doubling the Ix value with almost the same profile weight to optimise static properties

New Schüco FWS 50 combines simple processing with energy efficiency at the passive construction level.
Schüco FWS 50 façade sets new standards in processing and energy efficiency. Improved systems for a more convenient processing for both the workshop and the construction site.  The use of new prefabricated components significantly reduces the realisation time, making it more efficient.
Schüco FWS 50 façade offers architects multiple design options for the most popular visible profile widths – including a certified SI version for passive construction.
New system components make it possible, above all, to rationalise the work on the construction site: for example, an innovative system of integration into the building’s structure, ensuring reduction of contact points, makes installation easier and more reliable.
Thanks to the glass supports programme the installation of heavy panes is easy and safe while carrying greater loads!
An innovative cable routing system for the mullion and transom façade, providing the contractor with a simplified electrical installation.

• Innovative SI insulator with a hard core: easy screw tightening, transport without damage and rational processing
• Uniform gasket system for the entire system platform based on 9 mm, 11 mm and 13 mm high gaskets inside and 5 mm outside
• New type of glazing rebate spacing profiles and adaptive profiles for lintel-window glazing with simple clipping intallation technique with optimal gaskets: safe and clean execution
• Main pressure profiles in the future all with the same contour, including the required insulation materials (Standard, HI and SI): prefabricated solution for manufacturing economy with minimal preparatory work, doubling the Ix value with almost the same profile weight to optimise static properties

Façade systems
MC Wall
• a system used to design modern curtain walls. The system is a basis for façade structures: MC PASSIVE, MC PASSIVE+, MC GLASS and MC FIRE, a solution for fire protection. The MC WALL system offers many possibilities of creating the installation. It offers structures to be opened on the facade: parallel windows (MC PW) and roof windows (MC RW)
• a system used to design modern curtain walls.
• mullion-transom visual width: 55 mm
• the curtain wall in the MC Wall system consists of mullions and transoms fastened by stainless steel bolts. 2 x ø 6 stainless steel fasteners per joint ensure very high load capacity of the mullion-transom connection, both in the wind pressure plane and the infill load plane. The solution does not prevent using traditional transom supports or fastening transoms only with screws attached from the face side.
• a wide range of mullions and transoms suitable for static requirements.
• the insulators can be built accordingly to the infill thickness.
• application of steam-proof and steam-permeable membranes on the perimeter of the facade is easier, in accordance with new guidelines for installation of aluminium structures
• a wide range of decorative cover caps makes it possible to obtain varied visual effects on the curtain wall.
• the option of bending profiles (detailed specification of profiles and detailed technical parameters of profile bending process are available in the customer area of the website www.aliplast.pl)
• a wide range of colours available – RAL palette (Qualicoat 1518), structural colours, Aliplast Wood Colour Effect (Qualideco PL-0001), anodized (Qualanod 1808), bi-colour

The system is designed for the construction and execution of flat, light-weight curtain walls of the suspended or filling type, roofs, skylights and other structures.

The shape of mullions and transoms allows for erecting aesthetic façades with visible narrow division lines, ensuring at the same time durability and strength of the structure. The applied shape of profiles enables selection of mullion and transom profiles which flush with each other on the inside surface of the façade. When the structure is glazed, visually it forms a truss. It facilitates at the same time aesthetic and very accurate connection with other elements of the installation – with internal walls and suspended ceilings.
Among characteristics of the MB-SR50N system is a wide choice of mullion profiles (between 65 mm and 325 mm) and transom profiles (between 5 mm and 189.5 mm) and modern solutions designed for accessories and fasteners. Such features allow for a wider range of loads which are being carried – an infill in a fixed module of the façade may weigh up to 450 kg. The MB-SR50N system gives considerable freedom while laying out façade fixing points. A wide glazing range allows for application of glazing of large dimensions and two-chamber insulating glazing units.
Application of a continuous thermal barrier made of insulating material called ”HPVC” and profiled (grooved) EPDM glazing gaskets makes it possible to obtain proper thermal insulation class and reduce to a minimum vapour condensation on aluminium elements.
Among aesthetic varieties of the MB-SR50N system, likewise in older mullion / transom curtain walls are the following versions: PL (so-called  “horizontal and vertical line” where an emphasis is placed on either horizontal or vertical division) and a semi-structural façade of the EFEKT type. A particular attention should be drawn to the version featuring enhanced thermal insulation performance, i.e. MB-SR50N HI, in which special two-component insulators have been applied.
The MB-SR50N system enables installation in the façade of various types of windows and doors, including windows designed for the façades incorporating an awning window and a roof window. A particularly good visual effect is achieved when façade-integrated windows based on the MB-SR50 IW solution are installed in this system.
Lintel and sill belts of the façade, due to a sandwich-type structure in which non–flammable materials have been used, such as mineral wool and plasterboards, may obtain, like in the case of other Aluprof systems, fireproof classification EI30 and EI60, depending on the structure.
In order to construct broken walls, both in their vertical and horizontal sections, there have been used special overlapping profiles and properly shaped clamping and concealing strips with the effect that there are no limitations whatsoever as to shaping the building body and the need to use special corner mullions is eliminated.
As regards the declaration of conformity for vertical façades based on the MB-SR50N system, a harmonised European Standard PN-EN 13830 “Curtain Walling. Product Standard”
has been applied as a reference document.

Schüco ASS 80 FD.HI folding and sliding doors with high thermal insulation – more opening options, better functionality and simpler installation
Optimised Schüco ASS 70 FD and ASS 80 FD.HI folding and sliding door systems extend the variant with a 90 ° corner opening and a flat, warm threshold. Another novelty is the designer magnetic stopwatch with a matching flat handle as an additional equipment option.
The integrated leveling profile, compensating for the ceiling deflection, ensures light and comfortable sash operation and makes the system used in commercial and residential buildings of a higher standard.

Schüco ASS 70 FD and sliding doors with high thermal insulation – more opening options, better functionality and simpler installation.

Optimised Schüco ASS 70 FD and ASS 80 FD.HI folding and sliding door systems extend the variant with a 90 ° corner opening and a flat, warm threshold. Another novelty is the designer magnetic stopwatch with a matching flat handle as an additional equipment option.

The integrated leveling profile, compensating for the ceiling deflection, ensures light and comfortable sash operation and makes the system used in commercial and residential buildings of a higher standard.

Exterior folding door offers greater flexibility to its users. It enables us to use weather conditions to our advantage and virtually eliminate the barrier between the interior space and its surroundings. Such door can perfectly combine the interior space (home,café, restaurant) with the terrace or the outside area that is used seasonally.
With its excellent technical parameters, MB-86 FOLD LINE is a very convenient solution that enables the fabrication of large-dimension structures. Folding door can be opened both outwards and inwards and its leaves can be freely configured. It’s a modern product, designed to meet the high demands of users, architects and owners.

Schüco ASE 80 sliding and lift and sliding system. HI – combination of advantages of aluminum with pioneering thermal insulation on a passive level

Schüco ASE 80 sliding and lift and sliding system. HI combines advantages of aluminum with pioneering thermal insulation on a passive level tailored to the needs of sustainable architecture. In addition to an optional threshold flush tiled with the floor, the system offers an option with a narrow leaf profile for an even better view and light access.

Sliding and lift-and-slide door system with thermal break and a robust leaf frame with a small visible profile width

Ultraglide
sliding systems • a system featuring improved thermal performance, used to design sliding and lift-sliding structures
• the UG sliding structures are intended for residential buildings, mainly private and public buildings
• the system is adapted to the latest requirements for thermal insulation, aesthetics and safety; available system options: UG low-threshold version, UG – 90° angular solution
• with its parameters, the ULTRAGLIDE system makes it possible to design structures with very large dimensions of sliding leaves; maximum structure dimensions. available in the system: leaf height – Hs = 3300 mm; leaf width – Bs = 3200 mm.
• the ULTRAGLIDE system makes it possible to design large – but still stable – sliding windows and doors; maximum leaf weight: 250 kg – sliding option; 400 kg – lift-sliding option.
• structure design: 3, 5 and 7 chamber frame
• possible variants with two, three and four components based on the two-rail system
• profiles suitable for installation of various hand-locked fittings available on the market and automatic devices
• various types of infills can be used (double and triple glazed units)
• system is adapted to the latest requirements relating to thermal performance; the system is equipped with a 22 mm/28 mm wide separator improved with glass fibre, thermal inserts and under-glass inserts to improve cross-sectional thermal performance;
• available options:UG, UGi and UGi+
• used for designing large glazing, which provides natural lighting inside the building and facilitates interior design, with ensured stability, functionality and structure lightness;
• a wide range of colours available – RAL palette, structural colours, Aliplast Wood Colour Effect, anoda, bi-colour

Lift-and-slide door is the perfect integrating element that connects rooms or winter gardens with external spaces. It provides a convenient exit to the balcony, terrace or garden. When in the open position, the door does not take up space inside the room, whilst enabling a very good contact with the environment which further increases the comfort of use. The MB-77HS system is one of the best products and meets all the requirements for this product group. It has two different construction variants with different thermal insulation: ST and HI. The construction of profiles allows for making exclusive doors of large dimensions, filled with single or double-chamber glass, and the materials and technical solutions used help to achieve a high degree of thermal and acoustic protection. Due to its characteristics, the system can be used in various types of buildings: individual buildings, hotels or apartments.

Energy efficiency and thermal insulation play an increasing role in both new construction and the modernisation of residential and public buildings. The ADS 90 door series meets all the criteria set by this trend. Expanded insulation zones, a continuous centre gasket design and special glazing rebate  insulation achieve unbeatable system properties, such as class 7A watertighteness of up to 750 Pa and a Uf heat transfer coefficient for the frame of 1.4 W/m²K. With appropriate triple glazing or a leaf enclosing infill panel, a heat transfer coefficient of < 1.0 W/²K for entire door can be achieved. Thus, Schüco already has the insulation standards of the future in its offer today.
The Schüco ADS 90.SI and Schüco ADS 90 PL.SI aluminium door systems are record-breaking in terms of versatility. They can be combined with additional functions in many ways: for example, the award winning SchücoDoor Control System (DCS) offers simple and aesthetic access control solutions. Optimum functionality is guaranteed by the integrated overhead door closer with guide rail (ITS 96). Combining it with the door gives a perfect combination of energy saving, modern technology and the highest level of design. Of course, security aspect is also taken into account: the door can be realised up to and including burglary resistance class RC3 (WK 3). While Schüco ADS PL.SI Premium doors are rather designed for residential buildings, the Schüco ADS 90.SI series is also ideal for public and commercial buildings.

Schüco ADS 75.SI (Super Insulation) door with very good thermal insulation parameters is the ideal solution for buildings where the requirements for architectural solutions and energy management are at the highest level.
Thanks to the optional equipment elements, they can be used as multifunctional door and integrated with the building’s security and automation system. Innovative design, also available with rounded profile contours (SL version), harmonises perfectly with Schüco facade and window systems. Door with a very high level of thermal insulation – everywhere, where the highest expectations for energy efficiency are to be matched with unique architectural solutions.
design versions Residential Line (RL), Soft Line (SL) or Heavy Duty (HD)
automatic sealing of the threshold
easy access / barrier-free door, also for people with disabilities
access control/ door manager
filling covering the door leaf
panic door& escape door
radio control
integration into the building management system

The Schüco ADS 70.HI (High Insulated) door system combines outstanding thermal Insulation with the benefits of of the Schüco ADS door system. Profiles with an installation depth of 70 mm guarantee high structural stability. Thanks to the optional equipment elements, they can be used as multifunctional door and integrated with the building’s security and automation system. Timeless design is also available with rounded profile contour (SL version). Schüco ADS doors can be easily combined with Schüco facade and window systems.

Schüco ADS 65 door is a good economic solution where good thermal insulation is required. Thanks to the optional equipment elements, they can be used as multifunctional door and integrated with the building’s security and automation system. Modern design – for example, in the SL (Soft Line) version with rounded profile contours – can be integrated into the building envelope in a variety of ways, including combining with Schüco facade and window systems.

Schüco AWS 90.SI+ aluminium windows combine the benefits of aluminium with pioneering thermal insulation for sustainable architecture.
Schüco AWS 90 SI+ aluminium windows do not only meet the demand for maximum thermal insulation, but also fulfils the highest architectural requirements for design and freedom of design options, with a basic depth of just 90 mm. Combined with the concealed Schüco AvanTec fittings, transparent formats up to 160 kg can be implemented and combined with Schüco TipTronic, additional energy-saving potential in buildings can be exploited.

Standard series of windows, offering great flexibility in choosing the degree of thermal insulation with maximally improved installation in SimplySmart technology.
The Schüco AWS 75.SI+ window, since its launch in 2005 (then part of the Schüco AWS modular window system), has been developed into a standard series. In order to meet future statutory requirements and better adapt the product to the competitive conditions of the market, the Schüco AWS 75.Si+ window has not only been optimised and made more flexible in terms of thermal insulation, but also adapted for easier installation with SimplySmart technology.
In addition to reducing the Uf heat transfer coefficient by another 0.1 W/(m²K) to Uf = 1.2 W/(m²K) (with an external frame width of 117 mm), the need to change the installation depth was eliminated and the possibility of serial production was provided.
Apart from making the choice of thermal insulation more flexible, the installation process itself with the use of a central gasket and glazing rebate insulation is very important in this series. The already known installation systems based on a vulcanised gasket frame or a metre gasket with ready-made corners have been supplemented with another variant – a continuous centre gasket design. In addition, the processing of the insulation of the under-glass rebate was facilitated by the use of ready-made corners. This avoids cutting and allows you to place the bridges properly at once. Combination with the new generation of mechanical fittings SchücoAvanTec succeeded in significantly reducing installation time.

Schüco AWS window systems with an installation depth of 70 mm or more combines great thermal insulation with the unique advantages of aluminium: durability, strength, narrow visible profile width and rich design. A wide range of products enables, among others, manufacturing of windows which can be opened outwards as well as balcony doors with a low threshold in the standard Schüco AWS 70.HI series and meet many additional design requirements. Particularly interesting accents are provided by the SoftLine (SL) sash contour window with a soft line, with a rounded outer contour in the Schüco AWS 70 RL.HI system, or with a narrow “steel contour” in the Schüco AWS 70 ST.HI system.

• modern aluminium system for designing windows and doors that require excellent thermal insulation properties
• thermal break with a depth of 45 mm and made of solid and well-proven materials serves as a reliable thermal barrier
• the same type of thermal insert in the window sash and window frame ensure that the entire structure is continually protected against heat losses
• new profile and glazing overlap standard – increased depth for better thermal insulation and structural properties of the system
• new corner type to avoid contact between the screw and the corner when screwing in surface hardware elements for the PVC groove
• doors may be fitted with a roller hinge system having very high load-bearing capacity
• innovative water drainage system (no elements that block drain holes are visible)
• the same type of corner and T-shape fastener in the internal and external chamber (meaning fewer accessories and faster production)
• fewer glazing beads and gaskets while still maintaining glazing continuity depending on glazing unit thickness
• outside glazing option
• option to bend profiles (detailed profile specifications and detailed technical parameters of the profile bending process are available in the customer area at www.aliplast.pl)
• modern design
• this system is particularly recommended for low-energy and thermomodernised buildings but it also improves thermal comfort in standard buildings.
• a wide range of colours available – RAL palette, structural colours, Aliplast Wood Colour Effect, bi-colour, anodised

• 3-chamber window system for making doors with increased thermal insulation properties. Genesis 75 thermal parameters meet the requirements that will be valid from 2021 (Uw from 0.90)
• The Genesis 75 system is based on 75 mm deep frame profiles
• Genesis 75 is a system for designing window structures in both public buildings and single-family and multifamily buildings
• A wide range of profiles offered by the Genesis 75 system ensures that highly functional modern windows, doors, and shop windows can be designed
• The Genesis 75 system features modern insulating materials, which are now a novelty on the market. Apart from the typical centre gasket, an additional thermal gasket has been designed. As a result, windows are very tight (air permeability, watertightness) and have a novel look and feel
• The system will allow you to choose various profile surface finishes, giving your window a unique look
• The Genesis 75 window system sets a new standard for window thermal insulation, while still having the highest comfort of use and a modern profile design
• Option to install the Flyscreen system (Flyscreen – a system of insect screens)
• A wide range of colours available – RAL palette (Qualicoat 1518), structural colours, Aliplast Wood Colour Effect (Qualideco PL-0001), anodised, bi-colour.

The MB-104 Passive window and door system with a thermal break that provides the highest thermal insulation performance and meets all the requirements for components used in passive construction.

The MB-86 window and door system has very good parameters that will meet various needs of users. The profile construction comes in three variants depending on the requirements for thermal energy savings: ST, SI, and AERO.
MB-86 is the first aluminium window and door system that employs silica aerogel, which has excellent thermal insulation properties. In addition, the system features exceptional profile strength that allows for greater windows in size and weight.

MB-70 is a modern aluminium system designed for providing demanding thermal and acoustic insulation of exterior architectural building elements such as various types of windows, doors, vestibules, and spatial structures.

MB-45 is a modern aluminium system intended for making architectural exterior and interior building elements that do not require thermal insulation, e.g. various types of partition walls, windows, manual and automatic sliding doors, swing doors, vestibules, display windows, ticket box offices, showcases and spatial structures.

Superial 800

• 3-chamber window system with thermal insulation for making doors with high thermal insulation properties
• compatibility with the Superior system – adaptive profiles make it possible to integrate SP800-based structures with Superial shop windows
• the system has very good burglary resistance (the lock is far away from the external side)
• option to use a thermoinsulated door threshold, which can be removed after the door is installed in the opening
• option to bend profiles (detailed profile specifications and detailed technical parameters of the profile bending process are available in the customer area at www.aliplast.pl)
• two SP800 system variants are available:
SP800i
SP800i+
higher thermal insulation properties were achieved by applying special thermal inserts slid between thermal breaks and around the glazing; this solution improves cross-section thermal insulation properties by 0.2 – 0.5 W/m2K
• a wide range of colours available – RAL palette, structural colours, Aliplast Wood Colour Effect, anodised, bi-colour

Superial SU

• 3-chamber window system with thermal insulation for making windows with a sash that is concealed and invisible from the outside
• the system features a specially-designed frame shape that conceals the entire sash height
• a wide range of glazing for using all types of glazing: 1-chamber, 2-chamber, acoustic, and anti-burglary
• two profile drainage variants: traditional or concealed
• option to have a flat threshold in single-leaf balcony doors (improved weathertightness properties with the use of the ACRS461 gasket)
• option to bend profiles (detailed profile specifications and detailed technical parameters of the profile bending process are available in the customer area at www.aliplast.pl)
• the concealed sash system is desired by designers as it allows them to “hide” windows in aluminium and glass structures. This solution makes openable and fixed window lites look identical from the outside.
• option to have a flat threshold in single-leaf and double-leaf balcony doors and in rectangular doors (structures using dedicated profiles); improved weathertightness properties with the use of the ACRS461 gasket
• the SP SU system is available in a version with improved thermal insulation; the SP OUT i option is available with additional continuous thermal insulation at the point of contact between the glazing and profile.
• a wide range of colours available – RAL palette, structural colours, Aliplast Wood Colour Effect, anodised, bi-colour

Superial Out

• Superial Out system for designing tilt and turn windows opening outwards
• the Superial OUT is fully compatible with the Imperial window system (they share the same system elements: connectors, gaskets, glazing beads)
• the Superial OUT system features a uniform internal surface of the frame and the sash
• outward-opening windows may be fitted with two types of hinges: rotating hinges or scissor hinges; window hardware makes it possible to tilt the top or the bottom of the window outwards; option to turn the window outwards with the turn stop.
• outward-opening windows may be fitted with two types of hinges: rotating hinges or scissor hinges
• option to integrate windows with shop windows by using a reversing profile
• option to bend profiles (detailed profile specifications and detailed technical parameters of the profile bending process are available in the customer area at www.aliplast.pl)
• maximum dimensions and weights of structures in the Superial OUT system
• tilt windows: minimum sash width and height 500 mm, maximum sash width and height 2,000 mm, and maximum sash weight 100 kg for tilt windows
• turn windows:• minimum sash width and height 500 mm, maximum sash width 1,500 mm, sash height 3,000 mm, and maximum sash weight 120 kg for turn windows
• the SP OUT system is available in a version with improved thermal insulation
• available options: SP OUT i with additional continuous thermal insulation at the point of contact between the glazing and profile, SP OUT i+ with additional thermal insulation in spaces between thermal breaks
• this system is very popular in Scandinavia and Great Britain. It is a perfect match for houses designed to look like old mansions, bale buildings, or simple Scandinavia-style houses. Shutters are often used for this type of windows
• a wide range of colours available – RAL palette, structural colours, Aliplast Wood Colour Effect, anodised, bi-colour

Superial I+

• system designed for windows, doors, and shop windows with high thermal insulation parameters
• high thermal insulation properties were achieved by applying special thermal inserts slid between thermal breaks and around the glazing, improving cross-section thermal insulation properties by 0.2-0.4 W/m2K
• a wide range of system profiles ensures the desired look and structural strength
• option to install windows in facade systems
• rectangular and round glazing beads are available
• profile shapes suitable for installation of various hardware types including concealed highest and PVC hardware
• a wide range of glazing for using all types of glazing: 1-chamber, 2-chamber, acoustic, and anti-burglary
• two profile drainage variants: traditional or concealed
• option to bend profiles (detailed profile specifications and detailed technical parameters of the profile bending process are available in the customer area at www.aliplast.pl)
• option to have a flat threshold in single-leaf and double-leaf balcony doors and in rectangular doors (structures using dedicated profiles); improved weathertightness properties with the use of the ACRS461 gasket
• system designed for use in residential and public buildings, simultaneously allowing modern window solutions to be designed in multiple variants.
• the SPi, SPi+ system construction is based on the well-proven, extended, and valued Superial base system
• a wide range of colours available – RAL palette, structural colours, Aliplast Wood Colour Effect, anodised, bi-colour

Imperial Out

• window system for designing tilt and turn windows opening outwards
• the Imperial OUT system is fully compatible with the Imperial window system (they share the same system elements: connectors, gaskets, glazing beads)
• the IMPERIAL OUT system features a uniform internal surface of the frame and the sash
• outward-opening windows may be fitted with two types of hinges: rotating hinges or scissor hinges; window hardware makes it possible to tilt the top or the bottom of the window outwards; option to turn the window outwards with the turn stop.
• option to integrate windows with shop windows by using a reversing profile
• option to bend profiles (detailed profile specifications and detailed technical parameters of the profile bending process are available in the customer area at www.aliplast.pl)
• maximum dimensions and weights of structures in the Imperial OUT system:
– tilt windows:
minimum sash width and height 500 mm, maximum sash width and height 2,000 mm, and maximum sash weight 100 kg for tilt windows
– turn windows:
• minimum sash width and height 500 mm, maximum sash width 1,500 mm, sash height 3,000 mm, and maximum sash weight 120 kg for turn windows
• the IP OUT system is available in a version with improved thermal insulation:
• available options: IP OUT with additional continuous thermal insulation at the point of contact between the glazing and profile IP OUT i+ with additional thermal insulation in spaces between thermal breaks.

• this system is very popular in Scandinavia and Great Britain. It is a perfect match for houses designed to look like old mansions, bale buildings, or simple Scandinavia-style houses. Shutters are often used for this type of windows
• a wide range of colours available – RAL palette, structural colours, Aliplast Wood Colour Effect, anodised, bi-colour

Imperial I+

• Imperial system with increased thermal insulation properties: IP i, IP i+ designed for windows, doors, and shop windows with high thermal insulation parameters
• high thermal insulation properties were achieved by applying special thermal inserts slid between thermal breaks and around the glazing
• a wide range of system profiles ensures the desired look and structural strength
• option to install windows in facade systems
• rectangular and round glazing beads are available
• profile shapes suitable for installation of various hardware types including concealed highest and PVC hardware
• a wide range of glazing for using all types of glazing: 1-chamber, 2-chamber, acoustic, and anti-burglary
• two profile drainage variants: traditional or concealed
• option to bend profiles (detailed profile specifications and detailed technical parameters of the profile bending process are available in the customer area at www.aliplast.pl)
• system designed for use in residential and public buildings, simultaneously allowing modern window solutions to be designed in multiple variants.
• the IPi, IPi+ system construction is based on the well-proven, extended, and valued Imperial base system
• a wide range of colours available – RAL palette, structural colours, Aliplast Wood Colour Effect, bi-colour.

Imperial 800

• 3-chamber window system with thermal insulation for making doors with high thermal insulation properties
• compatibility with the Imperial system – adaptive profiles make it possible to integrate IP800-based structures with Imperial shop windows
• the system has very good burglary resistance (the lock is far away from the external side)
• option to use a thermoinsulated door threshold, which can be removed after the door is installed in the opening
• the system features finger trap protection
• option to bend profiles (detailed profile specifications and detailed technical parameters of the profile bending process are available in the customer area at www.aliplast.pl)
• two system variants are available: IP800i, IP800i+;
high thermal insulation properties were achieved by applying special thermal inserts slid between thermal breaks and around the glazing; this solution improves cross-section thermal insulation properties by 0.2 – 0.5 W/m2K
• a wide range of colours available – RAL palette, structural colours, Aliplast Wood Colour Effect, anodised, bi-colour

Imperial SU

• 3-chamber window system with thermal insulation for making windows with a sash that is concealed and invisible from the outside
• the system features a specially-designed frame shape that conceals the entire sash height
• a wide range of glazing for using all types of glazing: 1-chamber, 2-chamber, acoustic, and anti-burglary
• two profile drainage variants: traditional or concealed
• option to bend profiles (detailed profile specifications and detailed technical parameters of the profile bending process are available in the customer area at www.aliplast.pl)
• the concealed sash system is desired by designers as it allows them to “hide” windows in aluminium and glass structures. This solution makes openable and fixed window lites look identical from the outside.
• the IP SU system is available in a version with improved thermal insulation; the IP SU version is available, which features additional continuous thermal insulation at the point of contact between the glazing and profile.
• a wide range of colours available – RAL palette, structural colours, Aliplast Wood Colour Effect, anodised, bi-colour

The door catalog – AG Aluprof series is available at this link

The door catalog – AD Aluprof series is available at this link

The front door is one of the most important elements of our home. Protection
house against cold, rain or burglars are just some of their functions. Thanks
we can also isolate the door from street noises.

The MB-79N is the most state-of-the art and economical addition to the Aluprof window systems. It has been designed to outperform typical thermal insulation requirements. The MB-79 N series can be used to fabricate fixed, side-hung, hopper, tilt-and-turn, and hopper-and-slide windows. In addition to the economical version MB-79N E, featuring a one-component central seal, and the MB-79N ST version with a two-component central seal, Aluprof also offers the MB-79N SI variant with enhanced thermal insulation, and with profiles that come equipped with insulating inserts and a two-component central seal.

The system features:

• a 79 mm profile for the window and 70 mm profile for the window or door jamb
• thermal inserts; produced using state-of-the-art technology; they play an important part in attaining the high heat insulation parameters
• three thermal construction variants:
  • the MB-79N E; the most economic, central gasket for windows
  • the MB-79N ST; a two-component, central gasket for windows, designed to provide high thermal insulation
  • the MB-79N SI; providing the best thermal insulation. The profiles are fitted with insulating inserts produced using expanded polystyrene (EPS) and a two-component, central gasket
• a structure meeting the Technical Requirements taking effect from 2021 for windows and doors, at 0,9 W/(m2K and 1,3 W/(m2K, respectively
• thermal insulation for profiles; Ufvalue from 0.83 W/(m2K)
• compatibility with ALUPROF’s MB-86 and MB-104 Passive systems, using the same accessories and gaskets
• excellent kinematics, making it possible to build narrow, opening windows and doors
• the most popular window/door hardware and furniture can be used, including the latest fitting from Winkhaus, the AluPilot, distributed on the Polish market solely by ALUPROF